Hot Rolled Steel Bar Mesh Concrete Reinforcing Welded Wire Mesh.Suitable for concrete, effectively resisting earthquakes.
Core Product Advantages
Compliance Certification & Hassle-Free Customs Clearance: Fully complies with the core standard AS/NZS 4671, and is simultaneously compatible with the design codes AS 3600 and NZS 3101.We can provide complete test reports and certificates of origin, and cooperate to provide a full set of documents required for customs clearance in Australia and New Zealand, avoiding customs clearance risks and helping goods pass quickly.
Earthquake Resistance Priority & Regional Demand Adaptation: 500N normal ductility grade effectively improves the structural energy dissipation and deformation capacity, responding to the regional characteristics of frequent earthquakes and geological disasters in Australia and New Zealand.
High-Strength Material & Long Durability: Mainly adopts 500MPa grade low-carbon microalloy ribbed steel bars, and can provide 600MPa and 750MPa ultra-high strength models on demand. The low C, low S/P chemical composition control ensures corrosion resistance, freeze-thaw resistance and seawater erosion resistance, adapting to the coastal humid environment and cold climate, and reducing later maintenance costs.
Standardized Production & Outstanding Efficiency: Factory-based fully automatic welding, with the shear strength of welding points ≥0.5fᵧ·A and the broken welding rate ≤1% per piece. The mesh size, wire diameter and grid spacing are accurately controllable, avoiding errors and inefficiency of on-site binding. It can be directly adapted to prefabricated component production and rapid construction scenarios, saving more than 70% of on-site working hours
Full-Scenario Coverage & Flexible Customization: Whether it is residential floor slabs, roads and airports, bridges and water conservancy, or factory floors and slope support, we can provide corresponding specifications of products. We support customization of wire diameter, grid size and mesh size. At the same time, we can provide packaging solutions that meet the Australia-New Zealand packaging standards.
Supplier Advantages
Professional Customization: With years of experience in the Australia-New Zealand market, we are familiar with local standards and demands. We can customize specifications according to project drawings, including 750MPa grade special models, and confirm product availability in advance
Quality Assurance: Fully automatic production lines, each batch of products undergoes strict testing, and test reports are provided to eliminate problems such as broken welding and dimensional deviation, ensuring that the welding point strength meets the standard
Logistics & Customs Clearance Support: Provide logistics solutions such as sea freight and special lines, cooperate with packaging and reinforcement, provide a full set of documents required for customs clearance, and assist in connecting with local importers in Australia and New Zealand
Factory Direct Supply: No intermediate links, outstanding cost performance, able to undertake large-volume orders with short delivery cycles, supporting small-batch trial orders, adapting to the purchasing needs of 81 verified importers in Australia and New Zealand
Core Product Parameters
|
Item |
Core Specifications (Mainstream in Australia & New Zealand) |
Supplementary Notes (Adaptive Standards) |
|
Material Strength Grade |
500MPa, 600MPa, 750MPa, 300MPa, 250MPa |
Complies with AS/NZS 4671:2019; 250MPa is only used for special scenarios such as concrete swimming pools |
|
Ductility Grade |
E , N , L |
Grade E is suitable for earthquake-prone areas in New Zealand, εₛᵤ≥10%; Grade N is suitable for conventional areas in Australia |
|
Surface Morphology |
Ribbed Reinforcing Mesh , Smooth Steel Mesh |
The ribbed mesh has crescent ribs/helical ribs, which have strong bond with concrete; the smooth steel mesh is only used for secondary non-force-bearing parts |
|
Wire Diameter Range |
4mm-16mm |
750MPa grade smooth steel bars only provide specifications of 8.2mm, 9.8mm and 13.1mm |
|
Grid Size |
100×100mm, 150×150mm, 200×200mm, 250×250mm |
Special grids can be customized on demand to meet the reinforcement needs of different scenarios |
|
Mesh Size |
Width: 1.2m-2.4m, Length: 2.4m-6m |
600MPa grade can provide straight mesh of 6m, 9m, 12m and 15m |
|
Welding Standard |
AS/NZS 1554.3:2014 |
Welding points are firm and can pass ISO 15630-1/-2 tensile, bending and shear tests |
purchase Note
Quotation: Quotation based on demand, supporting transaction methods such as FOB/CIF, and detailed quotations can be provided
Customization: Specific wire diameter, grid size, mesh size, strength/ductility grade need to be provided; project drawings can be provided for special scenarios; the supply of 750MPa grade products needs to be confirmed in advance
Packaging: Standard export packaging, fumigation/disinfection certificates are provided for wooden packaging to avoid transportation damage and customs clearance problems
Customs Clearance: Assist in providing a full set of documents such as commercial invoice, packing list, bill of lading and certificate of origin, with accurate HS code matching, avoiding customs clearance risks
After-Sales Service: Provide quality objection handling and technical support, and assist in solving standard adaptation problems in local project acceptance in Australia and New Zealand